Skip to main content

Least Count

Least  Count

 

Instrument

Metric(m.m.)

British (Inch)

Vernier Caliper

0.02 m.m.

0.001"

Vernier Height Gauge

0.02 m.m.

0.001"

Vernier Tooth Gauge

0.02 m.m.

0.001"

Gear Tooth Gauge

0.02 m.m.

0.001"

Inside Micrometer

0.01 m.m.

0.001"

Outside Micrometer

0.01 m.m.

0.001"

Depth Micrometer

0.01 m.m.

0.001"

Dial Micrometer

0.001 m.m.

0.001"

Sheet Micrometer

0.01 m.m.

0.001"

Tube Micrometer

0.01 m.m.

0.001"

Combi Micrometer

0.01 m.m.

0.0001"

Vernier Micrometer

0.001 m.m.

0.0001"

Digitial Micrometer

0.001 m.m.

0.0001"

Dial Test Indicator

0.01 m.m.

0.001"

Digital Height Gauge

0.01 m.m.

0.001"

Gauge Block

0.01 m.m.

0.0001"

Slip Gauge

0.01 m.m.

-

Sine Bar

1' (min)

-

Vernier Bevel Protector

5' (min)

-

Angle Gauge Block

1”(sec)

-

Three Point Internal Micrometer

0.005 m.m.

-

Comments

Post a Comment

Popular posts from this blog

What is countersinking?

What is countersinking? Countersinking is an operation of beveling the end of a drill hole. The tool is called countersink. Countersinks have edges on a conical surface. Purpose of countersinking? to provide a recess for the head of countersinking screw. to   deburr a hole after drilling. for accommodating countersink rivet heads. to chamfer the ends of hole after thread cutting. Angle of countersinking             75 0 -  countersink riveting             80 0 - countersink self tapping screws             90 0 - countersink head screws and deburring.             120 0 - chamfering ends of holes to be threaded and other machining process. Type of countersink: Different types of countersinks are available 1. Taper shank and st...
Post a Comment
Read more

What is meant by taper turning?

Definition of Taper : Gradually increase or decrease in the diameter along with the length of job is called Taper. Taper Turning : Taper turning is a machining operation that is gradually increase or decrease in diameter from one part of a cylindrical work piece to another part is called Taper Turning. Taper can be either external or internal. If a work piece is tapered on the outside it has external taper; if it tapered on the inside, it has internal taper. TAPER ELEMENTS: D = Big diameter d= Small diameter l= length of the taper L= Total length of job α = Half taper angle 2 α = Full Taper angle Expression of Taper and its Conversion: Taper can be expressed by – ·         Giving the big diameter, small diameter and the length of the taper. Conversion : Tan θ = D-d/2L ·         Mentioning the included angle of the taper in degrees. EX: 30° Taper angle ·     ...
1 comment
Read more